WLS

9 Essential Steps to Winterize Your Pool in Pennsylvania

9 Essential Steps to Winterize Your Pool in Pennsylvania

When summer comes to an end in Pennsylvania, it is time to start thinking about more than putting away the patio furniture. If you own an inground pool, proper winterization is one of the most important things you can do to protect your pool, equipment, plumbing, and investment through the winter months.

Pennsylvania winters can bring freezing temperatures, snow, ice, and repeated freeze-and-thaw cycles. Water left inside pool plumbing or equipment can freeze and expand, potentially causing expensive damage.

So, how do you winterize a pool for winter? The process involves cleaning and balancing the water, preparing the equipment, removing water from the plumbing, protecting the pool lines, and installing a proper winter cover.

Here are 9 essential steps to winterize your pool in Pennsylvania.

1. Clean the Pool Thoroughly

Before closing your pool, give it a thorough cleaning.

Remove leaves, dirt, insects, and other debris from the pool. Brush the walls and floor, vacuum the pool, and empty the skimmer and pump baskets.

This step is more important than simply making the pool look clean. Debris and organic material left in the water can contribute to algae growth and water-quality problems while the pool is closed.

A clean pool also gives you a better starting point when it is time to open the pool again in spring.

Tip: Pay particular attention to areas around steps, benches, corners, and other places where debris tends to collect.

2. Balance Your Pool Water

Proper water chemistry is an important part of winter pool closing.

Before winterizing your pool, test the water and adjust the chemistry as needed. Your pool professional can recommend the appropriate levels for your specific pool and sanitation system.

Balanced water helps protect the pool surface and equipment while reducing the likelihood of algae, scaling, and other water-quality problems during the offseason.

Pennsylvania homeowners should not wait until the first hard freeze to deal with water chemistry. Give yourself enough time to test the water, make adjustments, and allow the system to circulate.

Important: Follow the instructions for your pool’s specific chemical products and equipment. Winterizing procedures can vary depending on whether your pool uses chlorine, salt, automation, a heater, or other equipment.

3. Shock the Pool Before Closing

After cleaning and balancing the water, many pool-closing procedures include shocking the pool before the final winterizing chemicals are added.

The purpose is to give the water an additional dose of sanitizer before the pool is covered and circulation is shut down for the season.

The exact product and dosage depend on your pool size, water chemistry, and sanitation system, so follow the manufacturer’s instructions or have your pool professional handle the treatment.

The goal is to start winter with clean, properly treated water rather than trying to correct water-quality problems after the pool has already been closed.

4. Lower the Water Level as Appropriate

The appropriate winter water level depends on your pool type, cover, liner, plumbing configuration, and manufacturer’s recommendations.

For many inground pools, the water is lowered below the skimmer or other specified level before the plumbing is winterized. However, you should not simply drain an inground pool without professional guidance.

Water surrounding an inground pool provides important structural support, and groundwater conditions can also affect how a pool should be closed.

A professional pool closing company can determine the appropriate water level for your specific pool.

Never assume that every pool should be drained to the same level.

5. Drain and Winterize the Pool Equipment

Freezing water can damage pool equipment, including pumps, filters, heaters, and other components.

The equipment must be properly drained according to the manufacturer’s instructions. Depending on the system, this may include removing drain plugs and allowing water to drain from the pump, filter, heater, chlorinator, and associated equipment.

Manufacturer instructions are especially important because pool equipment varies significantly from one installation to another.

For example, Pentair and Hayward equipment instructions emphasize removing water from pumps and piping when freezing temperatures are expected. Some systems may also require specific procedures for protecting components from freezing.

Never guess when winterizing expensive pool equipment.

If you are not familiar with your pool’s plumbing and equipment, this is a good time to bring in a pool professional.

6. Blow Out and Protect the Pool Plumbing

This is one of the most important steps in winterizing an inground pool.

Water remaining inside pool plumbing can freeze and expand. That expansion can put significant pressure on pipes, fittings, valves, and other components.

A typical professional winterization involves removing water from the pool plumbing lines using appropriate equipment and then plugging or protecting the lines so water cannot easily re-enter them.

Skimmer lines and return lines require particular attention.

Some pool systems also use specially designed winterizing plugs or devices to protect the plumbing and skimmer during the winter.

The goal is simple: remove as much water as possible from plumbing that could be exposed to freezing temperatures.

This is one reason professional pool winterization can be worthwhile. The plumbing layout of every pool is different, and an overlooked line can become a problem when temperatures drop.

7. Add the Appropriate Winterizing Chemicals

Once the pool has been cleaned and the water and equipment have been prepared, winterizing chemicals may be added according to the requirements of your pool and manufacturer’s instructions.

Winterizing chemical packages commonly address issues such as algae growth and water quality during the offseason.

Do not simply pour a collection of chemicals into the pool and assume it is protected. The correct products, quantities, and timing depend on the pool’s water chemistry and sanitation system.

It is also important to remember that not all antifreeze products are safe for pool systems.

If antifreeze is required for a specific part of your pool system, use only the type and concentration recommended by the equipment manufacturer or pool professional. Manufacturer documentation specifically warns against using automotive antifreeze and identifies propylene glycol as the appropriate type for certain pool applications.

8. Install the Winter Pool Cover

A quality winter cover is the final major line of defense between your pool and Pennsylvania’s winter weather.

Before installing the cover, inspect it for:

  • Holes or tears
  • Worn straps or hardware
  • Damaged anchors
  • Excessive wear
  • Loose or deteriorated components

The cover should be installed securely according to the manufacturer’s instructions.

For inground pools, different types of winter covers may be used, including solid safety covers and other professionally installed systems. Above-ground pools use different cover systems and may require additional support such as an air pillow.

A properly installed cover helps keep leaves and debris out of the pool while reducing exposure to winter weather.

Don’t Forget the Cover During Winter

Winterization does not mean you can completely forget about your pool until spring.

After major storms, inspect the pool area when it is safe to do so. Look for damaged cover hardware, excessive water accumulation, fallen branches, or other issues.

Never walk on a winter pool cover unless the manufacturer specifically says it is designed for that purpose.

9. Prepare for Pennsylvania’s Freeze-and-Thaw Weather

Winter in the Lehigh Valley is not always a steady stretch of freezing temperatures. Pennsylvania can experience freezing temperatures followed by warmer days and then another hard freeze.

That means your pool needs to be prepared for changing conditions.

If your pool has automation or freeze-protection features, make sure you understand how they work before winter arrives. Some systems are designed to keep water circulating when temperatures approach freezing.

However, a fully winterized pool and a pool being temporarily protected from a freeze are not necessarily the same thing.

If a pool has been completely closed and the plumbing has been winterized, do not restart equipment simply because temperatures temporarily rise unless your pool professional or equipment manufacturer recommends doing so.

And if an unexpected freeze arrives before your pool has been closed, contact a pool professional as soon as possible.